How to Pair the black Mini adapter (receiver) (Model number D2) with the black Transmitter (dongle) ?
Please follow the steps below to pair the wireless transmitter correctly:
- Connect the black mini adapter (RX) with your computer’s USB port, When turning on the computer for the first time, you need to launch the driver. （QuickShare-600A 8888）then Open the Status Bar
- On the computer, click/open the status bar at the bottom-right corner of the screen.
- Find the QuickShare icon.
- Open the QuickShare Settings
- Click the QuickShare icon to open the QuickShare interface.
- Select “Pair Transmitter”.
- Connect the Wireless Transmitter (dongle) for pairing
- When the screen shows “Please insert the wireless presentation transmitter for pairing”, connect the wireless transmitter to the computer’s USB port.
- press pairing, Wait a few seconds while the transmitter is being paired.
- Complete the Pairing
- When the pairing process is completed, the system will display the transmitter information/status.
- Please make sure the transmitter shows a successful pairing status before removing it.
- Connect the Transmitter to the Source Device
- After successful pairing, remove the transmitter from the computer.
- Connect the D2—the black mini adapter to the device that you want to share/cast from, such as a laptop.
- Start Wireless Presentation
- Once the D2—the black mini adapter (RX) is connected, use the transmitter (dongle)Unplug and replug to start screen sharing.
- The laptop screen should then be displayed on the receiver/display.
Important
If the transmitter is not paired, please repeat the pairing procedure above.
If you still have a pairing problem, please send us a short video showing the pairing process and the message displayed on the screen. We will check it for you.
For more questions for the Pairing issue while using the wireless transmitter and receiver, please contact us 1@sz-sinowell.com What’sapp/wechat/phone +86 13728685427
